Remembering phone numbers, tuning carburetors, setting points, and repairing appliances. I grew up poor and basically in a classic car salvage yard.
Rewinding a cassette tape with a pencil.
Both white and yellow pages in my state had the ink on the side for each letter of the alphabet. Just a black bar that indicates A B C D, etc… I could with fair accuracy open to the right letter and second letter of the person or company I was looking for a telephone number or address. If there was an entry, I had it found in a minute.
To this day I feel like that was a skill lost to the likes of Google and it bothers me when I need to find a phone number and searching and due to corporate greed, I have to sort through a page or 2 of results and ads before I can find what I want.
Where I live, it’s no longer required to learn to drive on a manual transmission car, so everyone only learns to drive automatic. I think the change was made around the time people born around 2000 were starting to learn. So that, I guess.
Apparently reseating RAM before deciding your computer is dead.
At some point people stopped knowing that 90% of hardware problems are resolved by reseating RAM and you’re good again for another thousand years or whatever.
And if it doesn’t work? “Oh, no. You wasted 2 mins and ruled out the RAM.”
Likewise, people accumulate junkware on their computers and upgrade the whole thing when it inevitably becomes slow.
correctly folding maps on the first go
Banging the top of TVs and other electronics to get them to work right.
Percussive Maintenance
Ayyyy
My mini fridge still gets one of those from time to time
My aunt and uncle had a then-modern CRT monitor that would occasionally go black & white due to a bad connector. Smacking it restored the color.
sure sign of some solder spots having contact issues, pretty common with the cheaper TV sets. I watched my father fixing countless TVs with a soldering iron and a multimeter.
I had an rca to coax converter for my PS2 that I needed to smack to get it to work right. I do not miss needing to do that. You’re right, it seems like with less analog devices, smacking things to make them work is a lost art.
That’s more a thing because of electronic components nowadays being directly being baked onto the PCB instead of simple soldering as we had back then, and the amount of electronics that were transferred into ICs which removes a lot of soldering spots.
Scotch tape big enough to repair a cassette but not so big that it makes the speakers pop.
Oh that was an incredible skill back in the day
Blowing into Game Boy cartridges in order to get them to work.
Pneumatic troubleshooting
Adding that to my vocabulary and filing it next to “percussive maintenance”
Developing in WML
umm, this one is a bit backwards, vending machines still take bills, and old days would only take coins
Sure, they still take them, but they also take cards and contactless payments. While the option still exists, most people just aren’t carrying cash.
I’ve had vending machines reject my cash and ask for a card (despite having both slots).
Could be that it didn’t have any change inside?
True, but I find that if I have cash I’m more likely to use it at a vending machine
Yeah but the mechanism that accepts the bills have gotten 1000% better.
You used to have to look at the picture on the thing itself to see the exact orientation you needed to put it in. If bill was upside down or backwards, it would spit it out.
Also you couldn’t press it in, it had to be delicate. And yes, if it wasn’t perfectly flat, then fuck you you’re out of luck. Spit right out.
Also, the real old ones would only take $1 (and sometimes $5, with no real way to tell which machines did) bills, and if you put in anything larger then you’re shit out of luck and you better not expect to get accurate change (or any change at all).
I think they improved that at some point where the mechanisms would be labeled as being able to accept 5 and 10s, but it was always a risk and if you did get accurate change, it was going to be all quarters. You’re going to get like 18 quarters back if you put a $5 bill in.
Although back then 18 quarters was more valuable than $4.50 because laundry machines ONLY took quarters
You were taking a risk that the vending machine even had 18 quarters in it to give you. For all you know, the last person that used it cleaned out all of the change and you don’t find out until it’s too late and you spent $5 on a $0.50 candy bar.
Adjusted for inflation, I’m pretty sure that’s like $13,000 nowadays.
Dialing a phone number using the gavel. I loved doing that back in the day. (I also loved reading phreaking zines)
Dialing zero was a bitch to do consistently tho.
is the gavel the
twistyrotary phone because I’m just imagining you hitting a phone with a hammerIt’s the part on rotary phones where the headset is placed when inactive - lifting the headset opened a switch and activated the line. if you press this switch in rapid succession (1 time for one, 10 times for zero, a pause to differentiate digits), this was equivalent to dialing the number on the dial.
Somewhat similar to what you could do with payphones back in the day - these signaled the inserted amount of currency by a specific signal tone sent across the line dependent on the value of the coin inserted. Play back this very frequency into the headset and voila - free phone credit.
That’s how I accidentally dialed 911 fucking around with the phone.
phreaky 😳
As someone with the tism that works a cash register, this skill is employed quite often.
Writing a post that isn’t just a screen capture of my feed.
Command line interfaces
Those are still around. A lot.
I would bet that in terms of raw numbers there are more people who use a CLI now than ever before, but by percentages a smaller number of computer owners who use a CLI than ever before.
Not for the layman user I suppose.
No one uses it anymore? At least I do and I can think of 20 or more people that do on a daily basis…
Yeah settle down mate. It’s an understandable misconception.














