• TryingSomethingNew@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    31
    ·
    5 hours ago

    There was an Apple ][ magazine that printed a program in hex each month. Pages and pages to type in. Get it all right and you had yourself a new program. Taught you patience if nothing else.

    • heartSagan5@lemmy.zip
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 hours ago

      In hex? But when you type a character, it isn’t the hex value? Or was there a special keypad used?

      I’d really love for someone to find a way to add hexadecimal keypad for these IPv6 addresses though.

      • frongt@lemmy.zip
        link
        fedilink
        English
        arrow-up
        4
        ·
        edit-2
        2 hours ago

        I guarantee that multiple companies make a hex keypad.

        If you mean for the Apple II, that’s far less likely, but I’m sure someone hacked one together. Should be easy to do these days, though.

    • palordrolap@fedia.io
      link
      fedilink
      arrow-up
      13
      ·
      5 hours ago

      There were multiple magazines like that for all the various 8-bits. I have a stack of old Compute!'s Gazettes that have both BASIC type-ins as well as hexadecimal listings. And I spent hours typing those in back in the day.

      I liked the BASIC ones better because they were easier to modify on the fly or after the fact. Once you’d typed in a few programs it was hard to not read and understand the program rather than just copy it.

      The hex ones were more difficult, but it was often possible to pick out well-known memory addresses and opcodes giving the potential to know what and where to POKE to make subtle changes later on.

      The really good listings came with a checksum program that you typed in first (once, then saved to disk or tape for future use), or even a dedicated hex editor with checksum, so that it would pick up mistakes. Not where. Only that the line you typed must have an error in it.

    • limer@lemmy.ml
      link
      fedilink
      English
      arrow-up
      6
      ·
      edit-2
      5 hours ago

      I did that a lot… and I printed my code on sheets of paper; I just feel weird reading OP article.

      Edit ( because I also printed out sheets of paper with my programs from the commodore64).

  • PerfectDark@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    53
    ·
    6 hours ago

    I came across a nice little preservation story that I couldn’t resist writing about!

    Back around 1980, Canadian university student Steven McDowell created an air traffic control simulation for the Commodore SuperPET, written in Waterloo microAPL. He thought the program had been lost forever, until more than forty years later, when he discovered three and a half pages of its original source code printed on old dot-matrix paper. Instead of just archiving the listing, he painstakingly typed it back into an emulator and spent around 40 hours debugging and reconstructing the software until the little aircraft were flying again!

    Nice example of how easily early computing history could disappear, and how something as ordinary as a few surviving sheets of paper can bring it back. I’ve written a tiny little article about McDowell, the unusual SuperPET and the recovery of his program. Hope you enjoy it!

    • bashibazouk@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 hour ago

      Same but with a Timex Sinclair 1000 and it’s respective magazine. 2k memory but I had the 16k upgrade module, and of course the cassette tape deck to save everything on…

      • shalafi@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        1
        ·
        2 hours ago

        I’m only a year or two older! I know I didn’t have my VIC-20 at 9 because I broke my arm on that birthday. No solace in computing. :(