John Malkovich’s voice and spectacular cadence in your head:

  • “It is estimated that Santa’s sleigh weighs 353 thousand tons. So, traveling at 650 miles per second would create such enormous friction that Santa and his reindeer would burst into flames. You understand? Like a meteor entering the atmosphere. This is a scientific fact.
    • Jumuta@sh.itjust.works
      link
      fedilink
      arrow-up
      4
      ·
      2 years ago

      650 mi/s is 1040,000m/s which is mach 3032. the heating at that point would be mainly from the superheated plasma, not wind resistance

    • the_tab_key@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      2 years ago

      Air “friction” has no dependence on mass though. An airplane will effectively have the same air resistance fully loaded as compared to if empty. The surface area/geometry doesn’t change. Same would apply to Santa’s sled.

    • Jesse@lemmy.ca
      link
      fedilink
      arrow-up
      2
      ·
      2 years ago

      And they’d be starting and stopping all over the place, so the kind of acceleration needed to reach that speed would kill any known organic being via g forces before they’d even suffer from the fire. But he’s one of the fae, so data on them is lacking I guess.

    • dQw4w9WgXcQ@lemm.ee
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      2 years ago

      The wind resistance shouldn’t be dependant on the mass. Shape of the sleigh would be the real factor.

      But another thing to consider is that the gigantic mass and heat capacity. Given that the sleigh has a good heat distribution, it would take a lot of air resistance to actually make the sleigh combust. I don’t have a decent guess for the average heat capacity, so I don’t actually know if it’s significant enough, but the calculation is more complex than just looking at the speed.

    • dalekcaan@lemm.ee
      link
      fedilink
      arrow-up
      1
      ·
      2 years ago

      Small nitpick, technically at those speeds the majority of the heat comes from air compressing in front of the object, not the air friction

    • ch00f@lemmy.world
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      2 years ago

      The heat doesn’t come from friction. It comes from compression of the gas in front of the object.