Rikudou_Sage to Fediverse@lemmy.mlEnglish • 2 years agoUpdate on my 3D printed Lemmy logo keychain: Life has not been kind to himi.imgur.comimagemessage-square22fedilinkarrow-up1146arrow-down19cross-posted to: 3dprinting@lemmy.world
arrow-up1137arrow-down1imageUpdate on my 3D printed Lemmy logo keychain: Life has not been kind to himi.imgur.comRikudou_Sage to Fediverse@lemmy.mlEnglish • 2 years agomessage-square22fedilinkcross-posted to: 3dprinting@lemmy.world
minus-square@ZeroMmX@lemmy.worldlinkfedilink1•2 years agoTwo questions: Are the eyes (and black layer) glued on? If they are glued on, wouldn’t you have been able to print this as a single print with two colors?
minus-squareRikudou_SageOPlinkfedilink1•2 years agoThey’re not, it’s a single print with two colours.
minus-square@ZeroMmX@lemmy.worldlinkfedilink1•2 years agoAh OK. Kinda weird that the eye popped off like that.
minus-squareRikudou_SageOPlinkfedilink1•2 years agoThere was low pressure in the nozzle after changing the colours.
Two questions:
Are the eyes (and black layer) glued on?
If they are glued on, wouldn’t you have been able to print this as a single print with two colors?
They’re not, it’s a single print with two colours.
Ah OK. Kinda weird that the eye popped off like that.
There was low pressure in the nozzle after changing the colours.