@nahostdeutschland@feddit.org to Mildly Interesting@lemmy.worldEnglish • 18 days agoThis surprisingly helpful packagingfiles.mastodon.socialimagemessage-square25fedilinkarrow-up1737arrow-down14file-text
arrow-up1733arrow-down1imageThis surprisingly helpful packagingfiles.mastodon.social@nahostdeutschland@feddit.org to Mildly Interesting@lemmy.worldEnglish • 18 days agomessage-square25fedilinkfile-text
minus-square@clutchtwopointzero@lemmy.worldlinkfedilink13•18 days agoYes, no need to guess or to do test holes to see which drill size is correct
minus-square@toynbee@lemmy.worldlinkfedilink24•18 days agoWhile I’m certainly no handyman, I usually just hold the drill bit to the screw to find one slightly smaller, then just use that.
minus-square@chiliedogg@lemmy.worldlinkfedilink12•18 days agoI am fairly handy and have never had that method fail for anything except screwing into thick metal, in which case I’m tapping threads and using a bolt anyway.
Yes, no need to guess or to do test holes to see which drill size is correct
While I’m certainly no handyman, I usually just hold the drill bit to the screw to find one slightly smaller, then just use that.
I am fairly handy and have never had that method fail for anything except screwing into thick metal, in which case I’m tapping threads and using a bolt anyway.